Steiner MD460 Owner/Operator's Manual & Illustrated Parts List

09-254B 6 - 13 rev 3/03
PARTS section 6
Parts List for Model MD472 - Figure 2B
Ref. Part No. Description Quantity
1 99-E13 Flange Nut, 3/8 10
2 03-0610 Clevis Pin, 3/8 X 1-1/4 1
3 02-PP0318 Presto Pin, 3/32 X 2-5/16 1
4 29-010 Grease Fitting, 1/4 Short 2
5 62-731.17 Frame, Tube 1
6 90-0612 Bolt, 3/8 X 1-1/2 2
7 53-060 Hub Cap, For Mower 2
8 99-AC12NF Locknut, Center 3/4 2
9 95-12 Flat Washer, 3/4 SAE 4
10 55-Z9504AB Ball Bearing, 3/4 ID 4
11 99-B20 Washer, Mach 3/4 ID 14 GA. 8
12 50-049 Caster, Mower 2
13 90-0640 Bolt, 3/8 X 5 2
14 53-104 Wheel, 10.25 X 3.25 Caster (Serial No. 1001 - 2882) 2
55-G527 Bearing, Ball F/53-104 Wheel 2
55-107 Bearing, 5/8 ID x 1-3/8 OD (Optional, Heavy Duty) 2
53-186 Wheel, 10.25 X 3.25 Caster (Serial No. 2883 - ) 2
55-112 Bearing, Roller 5/8 ID x 1-3/8 1
53-187 Retainer, Flanged for 53-186 2
15 95-10 Flat Washer, 5/8 SAE 12 A/R
16 50-062 Axle Tube, Caster Wheel 2
17 94-06 Flat Washer, 3/8 USS 14 A/R
18 42-450.17 Link, Height Adj. Middle Right 1
19 90-0610 Bolt, 3/8 X 1-1/4 3
20 99-A08 Locknut, Stover 1/2 3
21 42-449.17 Link, Height Adj.Front Left 1
22 42-452.17 Link, Height Selector 1
23 90-0810 Bolt, 1/2 X 1-1/4 1
24 90-0832 Bolt, 1/2 X 4 2
25 95-08 Flat Washer, 1/2 SAE 2
26 42-451.17 Link, Height Adj. Middle Left 1
27 62-732 Frame, Roller (Serial No. 1001 - 2301) 1
62-871.17 Frame, Roller (Serial No. 2302 - ) 1
28 50-080 Roller, Rear 1
29 50-105 Nylon Roller, Front (Serial No. 3332 - ) 1
50-007 Roller, Front (Serial No 1001 - 3331) 1
85-B11 Bearing, 3/4" Wood RollerSerial No 1001 - 3331) 2
30 50-074 Axle, Anti-Scalp Roller 1
31 90-0648 Bolt, 3/8 X 6 1
32 99-E12 Flange Nut, 5/16 4
33 55-FB16016 Bearing, 160 Flange 1" 2
34 97-0508 Carriage Bolt, 5/16 X 1 (Serial No. 1001 - 1285) 4
90-0510 Bolt, 5/16 x 1-1/4 (Serial No. 1286 - 2301) 4
99-K62 Bolt, Flange 5/16 x 1-1/4 (Serial No. 2302 - ) 4
35 64-663 Bushing, Adjuster Link Thin 4
36 90-0614 Bolt, 3/8 X 1-3/4 1
37 94-06 Flat Washer, 3/8 USS 2
38 64-662 Bushing, Adjuster Link Thick 2
39 64-662 Bushing, Adjuster Link Thick 1
40 99-K11 Bolt, Flange 3/8 X 3/4 1
41 64-807 Spacer (Serial No. 1001 - 1561) 2
64-845 Shield, Bearing (Serial No. 1562 - ) 2
42 29-045 Grease Fitting, 1/4 45-Deg. 1
43 64-799 Washer, 13/32 x 1-9/32 6

Steiner MD460 Specifications

General

Brand	Steiner
Model	MD460
Category	Lawn Mower
Language	English