104
THOR 40/60 H
COD. 6983000010
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
FIGURES
FIG. 2 B
Cod. 60249
FRANÇAIS
THOR 40/60 H
COD. 6983000010
45
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
3.1- NAME OF THE MACHINE
The name of the machine is:
Thor 40h 1F – thor 60h 1f – thor 60h 3f
3.2- NAME OF THE CONTROLS ON THE
FRONT PANEL
FIG.1 shows and lists the controls on the front panel of the machine.
KEY:
1) Machine live led
2) Air presence led
3) Excess temperature safety led
4) Torch and air safety and covering panel led
5) Torch connector coupling
6) Positive polarity socket DX 25
7) Cutting current regulation
8) Air test button
9) Line switch
10) RESET button
3.3- GENERAL CHARACTERISTICS
The THOR supplies adjustable continuous current so as to have
maximum cutting performance.
The THOR generator has been designed with the most advanced
technologies to offer the following advantages:
- Low weight to allow maximum ease of handling.
- The pilot arc can perforate painted or rusty metals.
- The inverter technology allows a stable arc to be obtained, which
ensures high cutting quality for a great variety of metals
TECHNICAL DESCRIPTION
ENGLISH
To Next Page
Loading...
