STELLAPRO reflex - Section 8 Updating Reflex Firmware

Wireless - Rotate dial to select
transmitter type (Elinchrom,
Godox, Profoto, Bluetooth,
Wireless OFF)
Set Wireless mode to Bluetooth
to perform rmware updates.
Make sure you have exited the
menu.
Elinchrom
Godox
Bluetooth
Profoto
- wireless off
wireless
Section 8
UPDATING REFLEX FIRMWARE
1. Download the StellaPro Imaging
Control Application
2. Set Reex Wireless Mode to Bluetooth
3. Exit Reex Menu
4. In the app scan for Devices
5. Select a Device to connect
6. Enter Serial Number
7. Select a Device to start update
G