Stelpro OASIS SOA Series

Need help?

Do you have a question about the Stelpro OASIS SOA Series and is the answer not in the manual?

Summary

Owners Manual

Important Instructions

Risk of Fire, Electric Shock, and Injury

Safety warnings regarding electrical hazards, fire, and bodily injury.

Intended Use and Placement Guidelines

Guidelines for proper installation location and intended use of the heater.

Installing the Fan Heater

Installation Location and Power Handling

Where to Install Your Fan Heater

Specifies clearance requirements and suitable locations for installation.

Cutting the Power Supply Safely

Instructions on safely disconnecting power before installation.

Installation Preparation Steps

Preparing the Surface for Installation

Steps to prepare the wall surface for mounting the heater.

Preparing the Fan Heater Unit

Mounting and Wiring the Heater

Mounting the Heater Unit to the Wall

Connecting the Electrical Wiring

Detailed steps for electrical wiring connections.

Final Assembly and Power-Up

Turning the Power Back On

Installing the SOA1501 PW Model (Power Cord)

Installing the Wall Bracket

Hanging and Plugging In the Device

Using the Fan Heater with Built-in Thermostat

Built-in Thermostat Interface Overview

Defining the Temperature Setpoint

Using Boost Mode

Built-in Thermostat Alerts

Troubleshooting the Fan Heater

Common Problems and Solutions

Lists common issues like no operation, breaker trips, and continuous running.

Restarting After Thermal Protection Triggered

Restarting with Built-in Thermostat

Restarting with Wall Thermostat

Maintaining the Fan Heater

Cleaning Air Inlets and Outlets

STELPRO Limited Warranty

Warranty Claim Procedure

Warranty Conditions and Exclusions