Need help?Do you have a question about the Stenner E20PHG and is the answer not in the manual?
Covers WARNING, Electric Shock, Hazardous Voltage, Explosion, Exposure, Fire, Chemical Overdose.
Appliance usage by persons with reduced capabilities.
Pump operation using a dry contact signal.
Pump operation using a 12-24 VAC/VDC signal.
Pump operation using a flow switch dry contact signal.
How to calculate the maximum system flow rate.
How to determine required solution strength and dosage.
Formula for calculating required pump output.
Confirming selected pump's output against requirement.
Steps to calculate available dose and pump operating time.
How to calculate the operating time percentage.
Steps to program mode and time percentage.
How to determine desired water volume for signaling.
Steps to calculate chemical feed duration.
Formula to calculate pump speed percentage.
General| Model | E20PHG |
|---|---|
| Category | Water Pump |
| Type | Peristaltic Pump |
| Max Pressure | 100 psi |
| Power Supply | Electric |
| Voltage | 120V |
| Frequency | 60 Hz |
| Tube Material | Santoprene |
| Maximum Flow Rate | 20 Gallons per Day |
| Pump Tube Size | 1/4 inch |
| Housing Material | Plastic |
To Next Page
