STEP 1150™
14
3. Follow the Bluetooth
™
pairing or set-up instructions and
screen prompts on your phone or other device to pair it with the
headset.
4. When prompted, enter the headset passkey of 0000.
5. If the pairing is successful, your headset indicator light will
flash green.
If your phone or device does not find the headset, turn off the
headset by pressing down the multi-function control for
approximately 5 seconds, reset your phone or device to the
beginning of the Bluetooth pairing process, and repeat steps
1-5. Once pairing is completed, your headset will work with your
cell phone anytime the two units are powered on and in working
proximity to each other.
To Next Page
Loading...