STEP 1150™
15
Resetting the Headset
When pairing the headset to a new Bluetooth
™
device, you may
want to reset the headset to its default settings. This clears all
current pairings.
To reset the Headset:
1. With the headset turned off, depress and hold down
the Multi-function control for 12 seconds. The
LED will flash green for approximately 2-3
seconds, then red and green for approximately 7-8
seconds, then orange. Release the button.
2. The headset will power off automatically after a few
seconds. The headset has now been reset.
To Next Page
Loading...