Need help?Do you have a question about the Steren COM-819 and is the answer not in the manual?
General| Placement | Wall |
|---|---|
| Cable length | 1.1 m |
| Product color | White |
| 5 GHz | No |
| 2.4 GHz | Yes |
| Number of users | 50 user(s) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Maximum outdoor range | 15 m |
| Maximum data transfer rate | 300 Mbit/s |
| Output voltage | 48 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | WPS |
| Flash memory | 16 MB |
| Internal memory | 64 MB |
| Antenna type | External |
| Antennas quantity | 2 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -10 - 65 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 45 mm |
|---|---|
| Width | 85 mm |
| Height | 165 mm |
List of general precautions and safety guidelines to ensure proper and safe use of the device.
Illustrations showing the front and rear views of the Access Point with labeled components.
Enumerates all the accessories and components provided in the product packaging.
Details different connection options (Options A, B, C) for integrating the Access Point into your network.
Guide on how to securely mount the Access Point onto a mast or tube using the provided belts.
Instructions for installing the Access Point onto a wall using screws for a secure fixed position.
Guide to connect the PoE adapter and Access Point, then search for the device's Wi-Fi network.
Instructions on how to access the device's configuration interface via a web browser using its IP address.
Selection of the desired operational mode for the Access Point, such as Router, Bridge, or Access Point.
Configuration of IP address, subnet mask, Wi-Fi network name (SSID), and password.
Reviewing the configured settings and completing the Access Point setup by connecting the network cable.
Instructions on how to perform a factory reset on the Access Point by pressing the reset button.
Technical specifications including input voltage, Wi-Fi standards, transmission power, ports, and operating conditions.
Specifications for the Power over Ethernet adapter, including input, output, and consumption.
Details on the warranty period, conditions for coverage, and circumstances that may void the warranty.
Information on how to contact customer service and where to find retailer details for support.
To Next Page
