10
MOTION:
The MOTION light comes on when the scale is not stable.
GROSS:
The GROSS lamp is on when the XC780 is displaying the
gross weight.
NET:
The NET lamp is on when the XC780 is displaying the net
weight.
ZERO:
The zero light comes on when the scale is within +/- 1/4
graduation of center zero.
TARE:
The TARE light comes on when any positive tare weight is
in XC780 memory.
SCALE 1-4:
The SCALE 1,2,3,4 lights indicate which scale is
currently being displayed.
COUNT:
The COUNT light comes on when the XC780 is in the piece
count mode.
ID:
The ID light comes on when a non zero ID is made the
current ID in XC780 memory.
SHIFT:
The SHIFT light comes on when the shift key is pressed
to indicate that the next key press will activate the
key's second function.
To Next Page
Loading...