Sterling Scale XC780 - Page 50

46
JUMPER SETTINGS
Digital board(780-001):
J4 Backlight no jumper Backlight off
1 -> 2 Backlight on
J3 Parameter no jumper Unlock parameters
Lock 1 -> 2 Lock parameters
J1 Expansion BUS no jumper Expansion BUS activated
1 -> 2 Expansion BUS de-activated
J2 Interrupt 1 -> 2 Expansion BUS interrupt enabled
Control 2 -> 3 Misc interface interrupt enabled
Analog board(780-003):
J1 External no jumper Use external sense
sense(+) 1 -> 2 No external sense
J4 External no jumper Use external sense
sense(-) 1 -> 2 No external sense
J2,3 Gain Adjust no jumper 1 mV/V to 3mV/V input
both on 1->2 .5mV/V to 1.5mV/V input