48
Parity - An error detection method used for serial communication.
Platter - The area of the scale where the weight is applied.
Remote Scale - A scale base not internal to the XC780, but connected to it.
Resolution - the smallest change in weight that the scale can distinguish.
RFI - Radio Frequency Interference. Interference from any transmitted waves in
the radio band.
RS-232C - A standard for serial communication between two computer devices.
Sample - The parts used as an example to represent the parts that will be
counted.
Sample Enhancement - Recalculating the Average Piece Weight with a larger
sample size to achieve a more accurate Average Piece Weight.
Sample Guide - Display the percent accuracy expected for the current sample.
Sense - A connection used to correct for inaccuracies caused by losses in long
cables.
Serial Communication - The transmission of data in a string format.
Setpoint - An output triggered when the displayed scale value exceeds the
entered threshold.
Signal - The load cell output signal.
Store - The operation which saves data in memory.
Tare - The deduction from the gross weight of a substance and its container
made in allowance for the weight of the container.
Update Rate - The speed at which the display changes from the last value to the
next value.
Zero - The reading when the scale is empty.
To Next Page
Loading...