Need help?Do you have a question about the Sterling 2000HG and is the answer not in the manual?
Summarizes all safety warnings and cautions for operation and maintenance.
Instructions for motor rotation checks, load connection, and handling high momentum loads.
Procedures for mounting, fasteners, vent plug relocation, and initial oil level checks.
Details on lubricant types, temperature ranges, and compatibility with seals.
Instructions for vent plug relocation for various mounting positions.
Details on oil capacities, recommended lubricants, and change intervals.
Guidance on checking oil levels, inspecting vent plugs, and mounting bolt checks.
Instructions for storing units for six months or longer, including lubrication and shaft rotation.
Details on the limited warranty coverage for parts and labor.
List and diagram of components for the 56C/140TC model.
List and diagram of components for the 180TC/210TC model.
Summarizes all safety warnings and cautions for operation and maintenance.
Instructions for motor rotation checks, load connection, and handling high momentum loads.
Procedures for mounting, fasteners, vent plug relocation, and initial oil level checks.
Details on lubricant types, temperature ranges, and compatibility with seals.
Instructions for vent plug relocation for various mounting positions.
Details on oil capacities, recommended lubricants, and change intervals.
Guidance on checking oil levels, inspecting vent plugs, and mounting bolt checks.
Instructions for storing units for six months or longer, including lubrication and shaft rotation.
Details on the limited warranty coverage for parts and labor.
List and diagram of components for the 56C/140TC model.
List and diagram of components for the 180TC/210TC model.
General| Model | 2000HG |
|---|---|
| Category | Industrial Equipment |
| Type | Pressure Gauge |
| Pressure Range | 0-2000 psi |
| Connection Size | 1/4 inch NPT |
To Next Page