EasyManua.ls Logo

Stern ELITE Series - Technical Data

Default Icon
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
TECHNICAL DATAINDEX
Power supply:  X .V AA batteries or V transformer
Recommended water
pressure:
.. bar ( PSI)
With water pressure of more than 8 bars,
use a pressure reducing valve for reduction.
Preset sensor range: mm / .” (customizable with optional remote control)
Minimum sensor range: mm / .”
Maximum sensor range: mm / .”
Security time:  seconds (can be reduced with optional remote control)
Hot water temperature: Max ˚C
Elite B
236300
Elite E 236400
Elite Plus B
236350
Elite Plus E 236450
Elite 1000 Plus B
236750
Elite 1000 Plus E 236850
Elite 1000 B
236700
Elite 1000 E 236800
Elite 1000B with
technician’s mixer
236720
Elite 1000E with
technician’s mixer
236805
TECHNICAL DATA
 PACK CONTENTS
PRE-INSTALLATION INFO
 INSTALLATION
ELITE  TECHNICIAN’S MIXER
 SETTINGS ADJUSTMENT
 BATTERY REPLACEMENT (BATTERY MODELS ONLY)
 MAINTENANCE
Filters cleaning instructions
Care and cleaning of chrome and special nishes
 SPARE PARTS LIST
 LIMITED WARRANTY
 TROUBLESHOOTING
The information in this document reflects products at the date of printing. Stern Engineering Ltd reserves the right, subject to all applicable laws, at any time, at its sole discretion,
and without notice, to discontinue or change the features, designs, materials and other specications of its products, and to either permanently or temporarily withdraw any of the
forgoing from the market. All information in this document is provided “as is” without warranty of any kind, either expressed or implied, including but not limited to any implied
warranties of merchantability, tness for a particular purpose, or non-infringement. Stern Engineering Ltd assumes no responsibility for errors or omissions in the information
presented in this document. In no event shall Stern Engineering Ltd be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever
arising out of or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this document, including their
design, are the property of Stern Engineering Ltd or other third parties and you are not permitted to use them without the prior written consent of Stern Engineering Ltd or such
third party as may own them.

Related product manuals