4
EN
Check contents
Separate all parts from the package and check everything against the packing
list.
Make sure all parts are accounted for before discarding any packaging
material.
If any parts are missing, do not attempt to install your Free electronic flush
valve until you obtain the missing parts.
Warnings
Do not install the system facing a mirror or any other electronic system operated
by an infra-red sensor.
To prevent reflection problems, it is recommended to keep a minimum distance
of 1.50 meters between the electronic flush valve and any other objects.
Preparation for Installation
Flush water supply lines thoroughly before installing the flush valve. Do not
allow dirt, Teflon tape or metal particles to enter the flush valve.
Shut off water supply.
Important
All plumbing is to be installed in accordance with applicable codes and
regulations.
PRE INSTALLATION INFO
To Next Page
Loading...
