Operation Manual (Version: B) 42 Type SP
INDEX
A
ABOUT THIS MANUAL • 5
Aim of maintenance • 33
AR (option) • 22
Automatic safety device • 12, 13
B
BDC (option) • 22
Bringing the dock leveller in loading/unloading position • 28
C
Cleaning • 37
Common faults and solutions • 38
Compliance with standards • 6
Control components • 21, 24
Copyright • 5
Cross traffic legs • 12, 13
D
DESCRIPTION • 19
Disclaimer • 5
Disposal • 18
Document conventions • 7
E
EC Declaration of conformity • 10
Emergency stop switch • 12, 13
Environmental aspects • 18, 36
F
Functional description • 22
G
General Safety Instructions • 11
Guarantee and liability • 6
H
Hazards • 12
I
INSPECTION AND MAINTENANCE • 33
Intended use • 21
Introduction • 27
L
Lateral tilt • 12, 15, 22
Loading and unloading below dock level with BDC
(optional) • 30
Lock-out / tag-out • 17
Lubrication • 37
M
Maintenance support • 12, 15
Manufacturers details • 6
O
Operating principle • 21
Operation elements • 28
OPERATION ELEMENTS • 24
OPERATION PROCEDURES • 27
Operator panel • 24
Operator panel buttons and functions • 24, 25
P
Pay attention to safety • 34, 37
Place the maintenance support • 16, 34, 38
PLS (option) • 22
Preventive maintenance schedule • 36
Product identification • 20
R
REACH declaration • 18
Recommissioning • 6
Related documents machine • 8
Remove the maintenance support • 35
Restart after emergency stop or power loss • 27
Returning the dock leveller to the parked position • 30, 32
Running procedures • 24, 28
S
Safety • 27, 34
SAFETY • 11
Safety circuit • 12, 14
Safety features • 12
Safety signs • 12, 16
Start • 27
Storing the manual • 9
Supplements to the manual • 9
Switch off • 28
Switch on • 27, 28
Switching off in an emergency situation • 28
T
Technical specifications • 19
Technical support • 5, 41
The deck does not descend or does not descend
sufficiently. • 39
To Next Page
