EasyManua.ls Logo

STERWINS 1300 JET SM5I-3 - 4. ASSEMBLY

STERWINS 1300 JET SM5I-3
212 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
191
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
12
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
4.1 UNBOXING
Do not use any sharp tool (cutter, knife...) when unboxing, you
may damage the product.
Do not use the power cord to lift, carry or transport the
machine.
Do not scrape the power cord across sharp edges and ensure
that it does not get pressed.
4.2 INSTALLATION
Tightly screw the pump illustration
2.2
Attach the pump to a flat level surface with suitable screws and silent block if necessary.
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed !
6
1
7
1. ON/OFF switch
2. Connector caps
3. Discharge connector (output)
4. Drainage plug
5. Suction connector (input)
6. Power cord
7. Filling plug
3
2
5
4
x 2
11
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
Maximum suction height 8m
Pump gross weight 16.5 Kg
Pump net weight 14.5 Kg
6000 L/h
Maximum discharge pressure 5.5 Bar
Maximum delivery height 55m
Max. water temperature 35°C
Tube connector Ø1’ 25 mm
IP Class IPX4
Guaranted sound power level 88 dB(A)
4. ASSEMBLY
WARNING! The product must be fully assembled before
operation! Do not use a product that is only partly assembled
or assembled with damaged parts! Follow the assembly
instructions step-by-step and use the pictures provided as a
visual guide to easily assemble the product !

Other manuals for STERWINS 1300 JET SM5I-3

Related product manuals