STERWINS 150HR EPW.4 - Product Graphic and Components; High-pressure washer component identification

A. High-pressure washer x1
B. Spray gun x1
C. Spear x1
D. 3-in-1 nozzle x1
E. Water inlet adapterx1
F. Nozzle pinx1
G. Detergent bottlex1
H. Soap tubex1
J. Manual x2
K. O-ring kit x 4
* The following accessories are not covered in delivery package. The users can buy these
accessories from the local representatives.
• 1 pcs water supply hose NOTE: Use a fabric reinforced water hose with
a commercially available coupling. Minimum diameter 13mm (1/2
inch); minimum length 1.5m.
• 1 pcs water backow preventer (if the machine will be connected
to the portable water mains, the water backow preventer must be
used .Use a backow preventer in accordance with EN12729 type BA
or EN 61770 with a one-way valve .)
K
4. PRODUCT GRAPHIC
152
EN EN