181
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
194
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
•
•
The pump must be installed in compliance with applicable
national regulations of each country.
• Check with a specialist for further detailed information.
• Before installation, adjustments, maintenance, or storage,
unplug the electric cable from the power outlet.
• Do not expose the electric plug to humidity.
• Some regions have regulations that restrict the use of the
product in some operations. Check with your local authority for
advice.
•
Local regulations may restr
ict the age of the operator.
• Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their property.
• Disconnect the plug from the power source from the product
before making any adjustments, changing accessories, or storing
it. Such preventive safety measures reduce the risk of starting
the product accidentally.
• Maintain the product. Check for misalignment or binding of
moving parts, breakage
of parts and any other condition that
may affect the operation. If damaged, have the product repaired
before use.
• While operating the pr
oduct, always wear substantial footwear
and long trousers. Do not operate the machine when barefoot
or when wearing open sandals. Avoid wearing clothing that is
loose fitting or that has hanging cords or ties; they can be caught
in moving parts.
The pump must not be used while any person is in the water.
7
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
•Check the fault current protection switch and the protective
earth contact (earthing) for proper function at regular intervals
•Check the power cord with mains plug for damage before every
use. If the power cord is damaged, please arrange immediately
for the exchange by an authorized customer service or a skilled
electrician.
•All electrical sockets should be fixed in an area that is protected
against floods.
•Do not use the power cord to carry/ transport the machine.
•Do not scrape the power cord across sharp edges and ensure
that it does not get pressed.
•The voltage indicated on the type plate must correspond to the
voltage of the electrical source
•Always plug the power cable to an earthed 220V-240V 50Hz
power supply protected by a minimum 10-amp fuse.
•Pollution of the liquid could occur due to leakage of lubricants
•If the product is already assembled, please make sure that all
screws are tightly fixed before using it. If the product requires
that you assemble it, please make sure upon opening the
package that all the elements needed for setting up the product
have been provided. If the product is damaged or has defects, do
not use it and take it back to the nearest store.
2.2 SYMBOLS ON THE PRODUCT
Complies with European standards: This symbol means that this appliance is compliant with
the applicable European directives, and a test of compliance with these directives has been
performed.
Single mark of circulation of products on the market of the Member States of the Customs
Union.
Ukrainian conformity marking
To Next Page
Loading...
