182
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
• Check the fault current protection switch and the protective
earth contact (earthing) for proper function at regular intervals
• Check the power cord with mains plug for damage before every
use. If the power cord is damaged, please arrange immediately
for the exchange by an authorized customer service or a skilled
electrician.
• All electrical sockets should be fixed in an area that is protected
against floods.
• Do not use the power cord to carry/ transport the machine.
• Do not scrape the power cord across sharp edges and ensure
that it does not get pressed.
• The voltage indicated on the type plate must correspond to the
voltage of the electrical source
• Always plug the power cable to an earthed 220V-240V 50Hz
power supply protected by a minimum 10-amp fuse.
• Pollution of the liquid could occur due to leakage of lubricants
• If the product is already assembled, please make sure that all
screws are tightly fixed before using it. If the product requires
that you assemble it, please make sure upon opening the
package that all the elements needed for setting up the product
have been provided. If the product is damaged or has defects, do
not use it and take it back to the nearest store.
2.2 SYMBOLS ON THE PRODUCT
Complies with European standards: This symbol means that this appliance is compliant with
the applicable European directives, and a test of compliance with these directives has been
performed.
Single mark of circulation of products on the market of the Member States of the Customs
Union.
Ukrainian conformity marking
To Next Page
Loading...
