196
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
• The pump is not intended for use in a swimming pool, it must
be installed and used in compliance with NFC15-100 installation
principles. Check with your professional electrician to obtain
further advice.
2.5 ELECTRICAL SAFETY
• WARNING ! This product produces an electromagnetic field
during operation! This field may under some circumstances
interfere with active or passive medical implants. To reduce
the risk of serious or fatal injury, we recommend persons with
medical implants to consult their doctor and the medical
implant manufacturer before operating this product !
2.6 PERSONAL SAFETY
CAUTION In order to prevent accidents or injuries,
keep in mind the weight of the appliance during
transport
(see Technical Data).
• Use personal protective equipment when manipulating the
product. Protective equipment such as gloves, eyes protections
used for appropriate conditions will reduce personal injury.
• Dress properly. Do not wear loose clothing or jewelry when
manipulating the product.
• Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
2.7 SURFACE PUMP SAFETY WARNINGS
CAUTION ! Water that has been delivered with this appliance is
no drinking water !
• Do not pour corrosive liquids (chemical products, cleaning
products) nor abrasive material.
• Do not expose the pump to frost.
• Do not operate the pump without water.
• Never carry the pump by its cable, nor pull on the cable to
unplug it.
• Do not modify the interior of the pump.
• While the pump is running, do not touch the pump, as well as
objects in contact with the water (for example, objects in the
water, railings, etc.).
• Water that has been delivered with this appliance is no drinking
water
• Do not pump greases, oils and salt water.
• Do not pump waste water from sanitary facilities and silty
water with a lower flowability than clear water.
• Do not pump water that has a higher temperature than 35°C.
2.8 RESIDUAL RISKS
• There are no additional residual risks associated with the use,
maintenance and transport of this product.
3. TECHNICAL DATA
Surface pump model 900 JET AUTO-3
Power rating 900W
Electric voltage / Electrical frequency 220V-240V / 50Hz
Maximum starting current 12 A
Maximum working current 3.8 A
Capacitor parameters(capacity / maximum
voltage)
16 μF/450v
Insulation class F
Motor rotation frequency 2986rpm
To Next Page
Loading...
