STERWINS 3276005711761 - Page 197

197
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
• Leaking lubricant may result in polluting the liquid.
• Do not pour corrosive liquids (chemical products, cleaning products) nor abrasive
material.
• Do not expose the pump to frost.
• Do not operate the pump without water.
• Never carry the pump by its cable, nor pull on the cable to unplug it.
• Do not modify the interior of the pump.
• While the pump is running, do not touch the pump, as well as objects in
contact with
the water (for example, objects in the water, railings, etc.).
• Water that has been delivered with this appliance is no drinking water
• Do not pump greases, oils and salt water.
• Do not pump waste water from sanitary facilities and silty water with a lower
• Do not pump water that has a higher temperature than 35°C.
2.9 SERVICE
•
parts. This will ensure that the safety of the product is maintained.
•
you use it again.
3. TECHNICAL DATA
Surface pump model 1100 JET IC-3
Power rating 1100W
Electric voltage / Electrical frequency 220V-240V / 50Hz
Maximum current 17.6 A
Working current 5.3 A
Capacitor parameters
(capacity / maximum voltage)
16 µF/450v
Insulation class F
Motor rotation frequency 2956rpm
Maximum delivery height 8m
Pump gross weight 13.4 Kg
10
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
• Do not expose the pump to frost.
• Do not operate the pump without water.
• Never carry the pump by its cable, nor pull on the cable to
unplug it.
• Do not modify the interior of the pump.
• While the pump is running, do not touch the pump, as well as
objects in contact with the water (for example, objects in the
water, railings, etc.).
• Water that has been delivered with this appliance is no drinking
water
• Do not pump greases, oils and salt water.
• Do not pump waste water from sanitary facilities and silty
water with a lower flowability than clear water.
• Do not pump water that has a higher temperature than 35°C.
2.8 RESIDUAL RISKS
• There are no additional residual risks associated with the use,
maintenance and transport of this product.
3. TECHNICAL DATA
Surface pump model 900 JET AUTO-3
Power rating 900W
Electric voltage / Electrical frequency 220V-240V / 50Hz
Maximum starting current 12 A
Maximum working current 3.8 A
Capacitor parameters(capacity / maximum
voltage)
16 μF/450v
Insulation class F
Motor rotation frequency 2986rpm