18
RU
KZ
EN
• DO NOT force the unit. Make shallow cuts in as many passes as are necessary to achieve the desired
depth. Cut at a slow, even pace.
Tips for best results
To direct clippings away from the operator, tilt the cutting head slightly down to the right; whenever
possible swing the trimmer in a left to right cutting motion. There is an embossed arrow on the top of
the safety guard indicating the preferred left to right direction of trimmer operation. Do not trim wet
grass or weeds.
NOTE : Some line breakage will occur from:
• Entanglement with foreign matter;
• Normal line fatigue;
• Attempting to cut thick vegetation;
• Forcing the line into objects such as walls or fence posts.
4.6 AFTER USE
Switch the product o and let it cool down. Check, clean and store the product as described below.
5. TRANSPORTATION
Transporting the machine may require that you meet certain requirements specic to your country.
Please make sure to respect them by contacting the authorities of your country, in order to respect them
all. Ensure temperature during transportation will never be out of temperature range given on chapter
storage. Always switch the product o.
Protect the product from any heavy impact or strong vibrations which may occur during transportation
in vehicles. Secure the product to prevent it from slipping or falling over. Use the transport cover for
metal blades during transport and storage
6. WINTERING
Follow all instructions given on chapter storage below. We recommend using the original package
for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
7. STORAGE
Store the machine : Illustration
6.4
Only store the machine in a clean, dry, ventilated place with a temperature range of 4°C to 24°C. Cover it
in order to provide added protection. We recommend using the original package for storage or covering
the product with a suitable cloth or enclosure to protect it against dust. Be sure to secure the unit while
transporting
Before storing the product, empty the fuel tank and run the engine until it is out of fuel. Shutdown
the power tool . Examine the unit thoroughly for worn, loose or damaged parts. Clean the unit before
storing. Do not expose the product to sunlight. Make sure the product is always protected from cold
and humidity. Store and transport the machine and fuel so that there is no risk of any leakage or fumes
coming into contact with sparks or naked ames.
In order to prevent unintentional starting of the engine, the spark plug cap must always be removed
during long-term storage.
To Next Page
Loading...
