6
RU
KZ
EN
Keep bystanders away.
The distance between the machine and
bystanders shall be at least 15 m.
Beware of blade thrust. Beware of thrown objects.
Don’t install or use any type of blade on
the unit displaying this symbol.
78 5 0min
-1
Maximum rotation speed of the
spindle
Do not touch hot surfaces.
QC
PASS
Quality control during the production
passed
Do not pull the starter rope further
than indicated
Ratio Gasoline/Oil
Do not smoke near the product
2.3 SYMBOLS IN THIS MANUAL
Type and source of the danger :
Failure to observe this warning may
result in physical injury or death.
Type and source of the danger: This
symbol indicates that damage to the
appliance, the environment or other
property may occur as a result of non-
observance of this warning.
Note : This symbol indicates
important information for better
understanding of the product.
Read the manual: This symbol
indicates that you need to read the
user manual carefully.
X.XX
Please refer to the corresponding
illustration at the end of the booklet.
Recycling code of paper.
2.4 WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
To Next Page
Loading...
