STERWINS 52PBC1-43BH.1 - Petrol Tool Specific Warnings

9
RU
KZ
EN
• Clear the work area before each use.
• Wear a face lter mask in dusty conditions to reduce the risk of injury associated with
the inhalation of dust.
• Do not point the product in the direction of people or pets.
• Do not operate the product near open windows, etc.
• Do not use the power tool if the switch does not turn it on and o. Any power tool that
cannot be controlled with switch is dangerous and must be repaired.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may aect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
2.8 PETROL TOOL SAFETY WARNINGS
DANGER! Exhaust gases contain dangerous carbon monoxide!
Inhale the poisonous particle may cause death.
• As soon as the engine is running, this product generates toxic exhaust fumes containing
chemicals, such as unburned hydrocarbons (including benzene) and carbon monoxide,
that are known to cause respiratory problems, cancer, birth defects, or other reproductive
harm. Use of this product can also generate dust, mist and fumes containing chemicals
that are known to cause respiratory problems, cancer, birth defects, or other reproductive
harm. Inhalation of certain dusts, especially organic dusts such as mold or pollen, can
cause susceptible persons to have an allergy or asthmatic reaction.
• Routine noisy work is to be licensed and limited for certain periods. Wear an approved
safety hard hat to reduce the risk of injury to your head. Noise may damage your
hearing. Wear sound barriers (ear plugs or ear muers) to help protect your hearing. Be
particularly alert and cautious when wearing hearing protection because your ability to
hear warnings (shouts, alarms, etc.) is restricted. Operate your machine as below so that
it produces a minimum of noise and emissions
- limit the hours of daily operation.
- do not run the engine unnecessarily and accelerate the engine only for cutting.
- do not use the machine with a damaged muer or loosened parts, regularly check the
machine by shaking it, if any abnormal sound comes from the machine, contact the local
service centre for checking or/and repair.