1. SAFETY INSTRUCTIONS
engine.
gStart the motor carefully according to manufacturer instructions
and with feet well away from the tool(s).
gDo not use this machine on land that may damage the blade.
gDo not put your hands or feet near or under rotating parts.
gHolding points which allow machine to be handled.
gNever pick up or carry a product while the motor is running.
gNever operate the appliance with defective guards or shields, or
without safety devices, for example deectors and/or catchers in
place.
gStop the machine, and disconnect it from the power supply. Make
sure that all moving parts have come to a complete stop before
clearing blockages or unclogging chute; before checking, cleaning
or working on the machine; after striking a foreign object. Inspect
the machine for damage and make repairs before restarting and
operating the machine; whenever you leave the machine.
gDuring the operation of the machine safety shoe should be worn.
gIf the machine starts to vibrate abnormally (check immediately)
inspect for damage; check for and tighten any loose parts; replace
or repair any damaged parts.
gFollow the maintenance and repair instructions for this product.
Never carry out any modications of the product. Information
about maintenance and repair is provided in this user manual.
gKeep all nuts, bolts, and screws tight to be sure the appliance is in
safe working condition.
gReplace worn or damaged parts for safety.
gOn machines with multi blade,take care as rotating one blade can
cause other blades to rotate.
gBe careful during adjustment of the machine to prevent
entrapment of the ngers between moving blades and xed parts
260
FR
ES
PT
IT
EL
PL
RU
EN
KZ
UA
RO
To Next Page
Loading...
