Before and after each use, check the product and accessories (or
attachments) for wear and damage. If required, exchange them for new
ones as described in this instruction manual. Observe the technical
requirements.
Be aware of the danger of moving hazardous parts.
The following part of this product may be replaced by the consumer.
Spare parts are available at an authorised dealer or through our customer
service.
Description Model no. or Specication
Blade 8231-546302
WARNING! For your safety, it is required that the plug attached
to this product is always connected to an extension cord! The
extension cord must be suitable for outdoor use with sockets protected
against water splashing! Ensure the extension cord is of the proper
size and type for your product (≥ 1.5mm
2
),which shall not less rubber
insulated, ordinary polychloroprene sheathed exible cord(code
designation (H05VV-F) and length should more than 10m.
The maximum permissible system impedance is Zmax<0.379Ω at
the interface point of the user’s supply. The user should determine in
consultation with the supply authority, if necessary, that the equipment
is connected only to a supply of that impedance or less.
2. SAFETY INSTRUCTIONS
MAINTENANCE
196
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
To Next Page
Loading...
