1. Intended use
2. Safety instructions
3. Know your product
4. Technical specications
5. Troubleshooting
6. Disposal and recycling
7. Warranty
8. Exploded view with parts list
9. EC declaration of conformity
Keep bystanders and pets away from
the danger area.
Read the instruction manual.
Danger - Rotating blades. Keep hands
and feet out of openings while machine is
running.
Switch o and remove plug from mains
before adjusting, cleaning or if the cord is
entangled or damaged.
Wait until all machine components have
completely stoppedbefore touching them.
Wear eye and ear protection.
Wear protective gloves.
Wear sturdy, non-slip footwear.
Wear tight-tted protective clothes.
Do not useas a step.
Disconnect from mains power immediately if
the power cord becomes damaged.
Protection against splashed water
from all directions.
Guaranteed noise power level.
Conforms to relevant EC safety
standards.
Do not dispose of electrical
equipment in domestic waste.
Machines marked(P40) are operated
intermittently until stabilization or
for 30 cycles, whichever is achieved
rst, each cycle comprising a
period of operation of 40s at rated
power input and a period of 60s
with the machine at no load. The
temperature is measured at the end
of a load period .
IPX4
P40
Class II - Double insulation.
SYMBOLS
CONTENTS
186
FR
ES
PT
IT
EL
PL
RU
UA
RO
EN
To Next Page
Loading...
