9
Diagnost Guide
RED LED (PROT)
Depending on the problem, the RED LED (PROT)
Output short circuit
or overload.
ge greater than allowed.
Verify minimum impedance.
Number of Flashes Problem Solu on
1
2
OVER
BAT
4
3
LOW
BAT
NOTE: RED LED (PROT)
STETSOM tech support.
in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can
Technical Speci ca ons
Channels:
T.H.D:
Crossover Low Pass:
Crossover High Pass:
Weight:
EU Declara on of Conformity (DoC):
EX3000EQ - 1 OHM: www.stetsom.com.br/cer ca ons/EX3000EQ_1ohm--CE-DoC_2014-30-EU_2017.pdf
EX3000EQ - 2 OHMS: www.stetsom.com.br/cer ca ons/EX3000EQ_2--EUDoC2014-30-EU.pdf
EX3500EQ - 1 OHM: www.stetsom.com.br/cer ca ons/EX3500EQ_1ohm--CE-DoC_2014-30-EU_2017.pdf
EX3500EQ - 2 OHMS: www.stetsom.com.br/cer ca ons/EX3500EQ_2--EUDoC2014-30-EU.pdf
EX3000EQ
2 OHMS
1
—
3900W
2425W
2 OHMS
13K OHMS
0.2V
≤ 10% THD
> 90 dB
10Hz ~ 25KHz
50Hz ~ 25KHz
10Hz ~ 700Hz
±10dB
±10dB
±10dB
9.5 ~ 15Vdc
2A ~ 163A
2A ~ 326A
77 x 222 x 188 mm
2.5 Kg
EX3500EQ
1 OHM
1
4160W
2660W
—
1 OHM
10K OHMS
0.2V
≤ 10% THD
> 90 dB
10Hz ~ 25KHz
50Hz ~ 25KHz
10Hz ~ 700Hz
±10dB
±10dB
±10dB
9,5 ~ 15Vdc
2.2A ~ 163A
2.2A ~ 362A
77 x 222 x 217 mm
2.8 Kg
EX3500EQ
2 OHMS
1
—
4100W
2650W
2 OHMS
12K OHMS
0.2V
≤ 10% THD
> 90 dB
10Hz ~ 25KHz
50Hz ~ 25KHz
10Hz ~ 700Hz
±10dB
±10dB
±10dB
9.5 ~ 15Vdc
2,2A ~ 189A
2,2A ~ 378A
77 x 222 x 217 mm
3.0 Kg
EX3000EQ
1 OHM
1
4100W
2590W
—
1 OHM
12K OHMS
0.2V
≤ 10% THD
> 90 dB
10Hz ~ 25KHz
50Hz ~ 25KHz
10Hz ~ 700Hz
±10dB
±10dB
±10dB
9.5 ~ 15Vdc
2A ~ 175A
2A ~ 351A
77 x 222 x 188 mm
2.4 Kg
To Next Page
Loading...
