STIEBEL ELTRON Accelera 300 - OPERATION; 1. Overview; 2. General information; 2.1 Key to symbols

OPERATION
OvERvIEW
6 | ACCELERA® 300 HEAT PUMP WATER HEATER WWW.STIEBEL-ELTRON-USA.COM
1. Overview
Front of the water heater
7
6
2
5
4
3
1
26_03_01_1338
4
4
8
1 Water heater cover
2 Opening for PT valve
3 Condensate drain
4 Leveling feet
5 Cold water inlet
6 Hot water outlet
7 Air entry
8 Condensate spillover
An 80 gallon water tank is part of the water heater. Foam insulation
is applied to the outside of the water tank to prevent heat losses.
The water heater casing is made from powder-coated sheet steel.
The internally enameled water tank is supported by three height-
adjustable anti-vibration leveling feet.
OPERATION
Back of the water heater
9
10
26_03_01_1337
9 Air discharge
10 Entry for the power cable
11 Information labels, serial no.:
11