STIEBEL ELTRON AQ 35 E-2 - Care and Maintenance; Hot Water Capacity; Technical Data

STIEBEL ELTRON
7
1. Operation Instruction for the user and the qualied installer
1.4 Care and Maintenance
All that is needed for the housing is a
damp cloth. Do not use any abrasive
cleaning agents or agents containing
solvents.
Maintenance work may only
be carried out by a qualified
installer.
1.5 Hot water capacity
The hot water capacity depends on the
power of the unit, the cold water tempera-
ture, and the flow volume.
Thermostat cut-off is a service
case only for qualified technician
1.6 Technical Data
Type AQ 35 E - 2 AQ 45 E - 2
Nominal capacity l 0.18
Design Open
Minimum inlet water pressure MPa(bar)
0.015(0.15)
Maximum inlet water pressure MPa(bar)
0.5(5.0)
Water connection G½” (External Thread)
Dimension (H x W x D) mm 360 x 200 x 110
Weight kg 1.2
Electrical connection 1/N/PE/AC 220...240 V.
Recommended circuit breaker A 20 25
Recommended cable size Sqmm. 2.5 - 4 2.5 - 4
Rated Power (kW) Rated current (A)
220 V
230 V
240 V
kW - A
3.5 - 15.9
3.8 - 16.5
4.2 - 17.5
kW - A
4.5 - 20.5
4.9 - 21.3
5.4 - 22.5
Note:
The cable sizes can only be a guiding value. Always abide by the corresponding local standards, laws and regulations.
Stiebel Eltron cannot be held liable for any damages.