To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON HDB-E 12 Si and is the answer not in the manual?
General| Type | Instantaneous water heater |
|---|---|
| Power Rating | 12 kW |
| Voltage | 400 V |
| Phases | 3/PE |
| Frequency | 50/60 Hz |
| Specific Water Volume at Δt 30 K | 5.8 l/min |
| Protection Class | IP 25 |
| Connection Type | Fixed connection |
| Connection | G 1/2 |
| Temperature Range | 30°C to 60°C |
Provides basic details, safety guidelines, symbols, and units of measurement for appliance users.
Details intended use, general safety instructions, and test symbols for safe operation.
Explains the heating system, thermostatic valve, and overall design of the appliance.
Instructions on setting the DHW temperature and managing outlet capacities.
Guidance on cleaning the appliance and its components, and routine care.
Helps identify and resolve common faults and issues encountered during operation.
Outlines safety instructions and regulations for proper installation.
Lists standard delivery items and optional accessories for installation.
Covers essential steps and considerations before commencing installation.
Details the installation process, including site selection and factory settings.
Procedures for initial startup, including safety checks and recommissioning.
Instructions on how to safely disconnect and shut down the appliance.
Guides users through diagnosing and fixing common installation and operational faults.
Procedures for draining the appliance for maintenance or frost protection.
Contains technical data, output, specifications, and fault conditions.
Details the terms and conditions of the product guarantee.
Information on responsible disposal and environmental considerations.
