To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON DCE-C 10/12 Trend and is the answer not in the manual?
General| Model | DCE-C 10/12 Trend |
|---|---|
| Power Rating | 10 kW / 12 kW |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Temperature Range | 30 - 60 °C |
| Water Connection | 1/2 inch |
| IP Rating | IP 25 |
| Type | Instantaneous Water Heater |
| Operating pressure | 10 bar |
Details on safety instructions structure, symbols, and keywords.
General safety guidelines and intended use of the appliance.
Defines the specific purpose and appropriate usage of the appliance.
Covers safety warnings for burns, injury, and material losses.
Explains how the appliance operates and its heating system.
Guides users on how to identify and resolve common appliance problems.
Safety precautions for installation and qualified contractor requirements.
Emphasizes using original accessories and observing regulations.
Covers site preparation, clearances, and water installation advice.
Details water connection procedures, pipe materials, and flow rate requirements.
Covers factory settings, standard installation on finished walls, and opening the appliance.
Step-by-step guide for installing the appliance on finished walls.
Details on changing connected load, initial start-up, and appliance handover.
Instructions for adjusting the appliance's power setting using a jumper.
Lists diagnostic lights and guides users through fault identification and remedies.
