To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON DCE-X 6/8 Premium and is the answer not in the manual?
General| Rated Voltage | 230 V |
|---|---|
| Control Type | Electronic |
| Energy Efficiency Class | A |
| IP Rating | IP25 |
| Display | LCD |
| Frequency | 50 Hz |
| Temperature Setting Range | 30-60°C |
| Water Connection | G ½" |
General information and safety warnings for appliance usage, including scalding risks.
Information for users and qualified contractors, including symbols and units of measurement.
Details on safety instruction structure, keywords (DANGER, WARNING, CAUTION), and risk symbols.
Describes the appliance's suitability for domestic hot water heating and general domestic use.
Specific safety warnings concerning burns, scalding, and potential injury risks.
Explains automatic switching, heating process, and temperature regulation.
Details the components of the user interface, including buttons and display elements.
Lists and explains the various symbols that appear on the appliance's display.
Step-by-step guide on how to adjust the water temperature using the selector.
Covers both contractor-set anti-scalding protection and user-set Tmax limit (childproofing).
Instructions on assigning and saving preferred temperatures to memory buttons.
Explains how inlet temperature is displayed when it exceeds the set temperature.
Introduces the info menu for displaying consumption values like flow and energy usage.
Instructions on how to activate and navigate the parameter menu for settings.
Details various settings like ECO, temperature limit, wellness showers, units, and reset options.
Guidance on how to exit the parameter menu after making settings.
Suggests specific temperature settings for energy saving and optimal appliance operation.
Guidance on cleaning the appliance with a damp cloth and checking taps for limescale.
Lists common problems, their causes, and remedies for quick fault resolution.
Emphasizes that only qualified contractors should perform installation and maintenance.
Stresses using original accessories and spare parts for trouble-free operation.
Advises observing all applicable national and regional regulations and instructions.
Lists the items included in the appliance packaging and optional accessories.
Guidance on selecting a suitable installation location, free from frost, and minimum clearances.
Specifies the required clearances around the appliance for operation and maintenance.
Details on performing water connections, permissible materials, and flow rate requirements.
Step-by-step guide for mounting the appliance on finished walls, including opening and preparing.
Explains how to set the internal anti-scalding protection using jumper settings.
Details how to adjust the appliance's connected load using jumper settings.
Steps for the initial start-up, including filling, tightness check, and safety switch activation.
Guidance on explaining the appliance to users and highlighting potential risks.
Steps for recommissioning the appliance after a water supply interruption.
Instructions on how to properly shut down and secure the appliance.
Covers electrical connection from above and below on unfinished walls.
Specific electrical connection method for short power cables on unfinished walls.
Specific electrical connection method from the side on finished walls.
Procedures for water installation on unfinished walls using specific accessories.
Guidance on limiting maximum inlet temperature when using preheated water.
Overview of appliance components, their functions, and installation guidance.
Explains the meaning of the diagnostic traffic lights (LEDs) for fault indication.
How to access and interpret fault codes (E1, E2, E3) displayed on the appliance.
Instructions for draining the appliance and cleaning the strainer.
Provides diagrams and details of the appliance's dimensions and connection points.
Illustrates the electrical connections and components within the appliance.
Details the domestic hot water output based on connected load and temperatures.
Information on electrical resistivity and conductivity for different water types.
Information on pressure drop for taps and pipework sizing recommendations.
Provides energy efficiency class, consumption, and sound power level.
Comprehensive technical data including electrical, application limits, and hydraulic specifications.
Outlines the conditions and limitations of the product guarantee.
Guidance on environmental protection and proper disposal of materials after use.
