INSTALLATION
Commissioning
ISG web www.stiebel.com.au
7.2.2 Registration without router
Use the crossover cable supplied to connect the ISG to a net-
work connection on your computer.
Enter "http://servicewelt" or "192.168.0.126" in the address
bar of your web browser. Press Enter.
If the Servicewelt does not open, you must manually assign your
computer an IP address in the ISG standard IP address range.
Example:
The ISG has the default IP address "192.168.0.126". Your computer
therefore obtains the IP address "192.168.0.100".
Open the control panel and navigate to the "LAN connection"
button (Windows7).
Click on "Properties".
Click on "Internet protocol version4".
Check "Use the following IP address".
In the field "IP address", enter "192.168.0.100".
In the field "Subnet mask" enter "255.255.255.0".
Click on "OK".
Enter "http://servicewelt" or "192.168.0.126" in the address
bar of your web browser. Press Enter.
Restart your computer if the Servicewelt does not open.
Note
If the Servicewelt still does not open after manual IP ad-
dress assignment and a restart, consult an IT contractor.
Note
Before disconnecting the ISG, reset the default network
settings on your computer.
7.3 Network configuration in the SERVICEWELT
D0000064136
Click on "Profile" in the menu bar to access the network
settings.
D0000035903
DHCP is activated by default (factory setting). You must deactivate
DHCP to enter an IP address manually.
Uncheck DHCP to deactivate it.
Enter your own IP address and the subnet mask.
D0000062371
Enter the DNS server name resolution.
Note
The default gateway and address of DNS server1 are
usually the router IP address.
Enter "http://servicewelt" in the address bar of your web
browser. Press Enter.
The Servicewelt or the selected IP address will open. Your data
will be loaded.
Commissioning is now complete.
Note
We recommend bookmarking the SERVICEWELT or adding
it to your favourites in your web browser.
To Next Page
Loading...