STIEBEL ELTRON SHP-A 220 Plus - Appliance Parameters; Guarantee

www.stiebel-eltron.com SHP-A 220-300 Plus | 33
ENGLISH
INSTALLATION | GUARANTEE | ENVIRONMENT AND RECYCLING
Specication
16.5 Appliance parameters
SHP-A 220 Plus SHP-A 300 Plus SHP-A 300 X
Plus
Reduced start hysteresis K 6 6 6
Maximum temperature increase time h 13 13 13
Maximum defrost time min 60 60 60
Defrost end temperature °C 3 3 3
minimum evaporator temperature °C -20 -20 -20
Recurring pressure fault - 5 5 5
Pressure fault evaluation time h 5 5 5
Compressor lockout time min 20 20 20
Set rapid heating temperature °C 65 65 65
Start temperature for the frost protection function °C 8 8 8
Set temperature 1 ( Factory setting ) °C 55 55 55
Guarantee
The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not aect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
ENVIRONMENT AND RECYCLINGGUARANTEE