ENGLISH
WWW.STIEBEL-ELTRON.COM WPL 10 ACS | 33
INSTALLATION
SPECIFICATION
WPL 10 AC WPL 10 ACS
Cooling capacity at A35/W18 2.95 2.86
Sound data
Sound power level outdoor installation (EN 12102) dB(A) 59 60
Sound pressure level at 5 m distance in a free field dB(A) 38 38
Sound pressure level at 10 m distance in a free field dB(A) 32 32
Application limits
Min. application limit on the heating side °C 15 15
Max. application limit on the heating side °C 60 60
Heat source application limit (min.) °C -20 -20
Heat source application limit (max.) °C 40 40
Water hardness °dH ≤3 ≤3
pH value (with aluminium compounds) 8.0-8.5 8.0-8.5
pH value (without aluminium compounds) 8.0-10.0 8.0-10.0
Chloride mg/l <30 <30
Conductivity (softening) μS/cm <1000 <1000
Conductivity (desalinating) μS/cm 20-100 20-100
Oxygen 8-12 weeks after filling (softening) mg/l <0.02 <0.02
Oxygen 8-12 weeks after filling (desalinating) mg/l <0.1 <0.1
Electrical details
Current (with/without softstarter) A 25/39 26/-
Fuse - compressor A C16 C25
Emergency/booster heater fuse A B16 B 35
Control circuit fuse A B16 B16
Frequency Hz 50 50
Rated compressor voltage V 400 230
Rated voltage, emergency/booster heater V 400 230
Rated control voltage V 230 230
Compressor phases 3/N/PE 1/N/PE
Control phases 1/N/PE 1/N/PE
Phases, emergency/booster heater 3/N/PE 1/N/PE
Versions
Refrigerant R407 C R407 C
Refrigerant capacity kg 2.5 2.5
Flow/return connection G 1 1/4 A G 1 1/4 A
Defrost method Circuit reversal Circuit reversal
IP-Rating IP14B IP14B
Frost protection Yes Yes
Dimensions
Height mm 900 900
Width mm 1270 1270
Depth mm 593 593
Weights
Weight kg 120 120
Values
Flow rate, heating side m³/h 1.4 1.4
Heating flow rate (min.) m³/h 0.7 0.7
Flow rate, heat source side m³/h 2300 2300
Internal pressure differential hPa 180 180
To Next Page
Loading...
