11 STORAGE
1. Change the oil when the engine is still warm.
2. Thoroughly clean the whole machine. It is
particularly important to clean the bottom
side of the cutting means assembly.
3. If the paintwork is damaged, touch it up to
prevent rust.
4. Place the machine in a covered, dry place.
For machines with electric starter:
If the storage temperature is correct, simply rechar-
ge the batter every four months.
Charge the battery before putting the
machine into storage. The battery can
be seriously damaged it if is put into
12 TERMS OF PURCHASE
The warranty covers all material and manufactu-
ring defects. The user must follow all the instruc-
tions provided in the accompanying documenta-
tion.
The warranty does not cover damages caused by:
• • failure to become familiar with the
documentation accompanying the machine,
• • carelessness,
• • incorrect or prohibited use or assembly,
• • use of non-genuine spare parts,
• • use of accessories not supplied or approved
by STIGA SpA.
The warranty does not cover:
• • normal wear and tear of consumables, such
as drive belts, headlights, wheels, bolts and
wires.
• • normal wear and tear
• • engines. Engines are covered by the
warranty provided by the relative manufacturer
in compliance with the specied terms and
conditions.
The purchaser is protected by his own national
legislation. The purchaser’s rights envisaged by
the national laws in his own country are not in any
way restricted by this warranty.
To Next Page
Loading...
