To Next PageTo Next Page
Need help?Do you have a question about the Stiga BC 646 Series and is the answer not in the manual?
General| Brand | Stiga |
|---|---|
| Model | BC 646 Series |
| Category | Brush Cutter |
| Language | English |
Explains how to interpret manual sections and symbols for safe operation.
Outlines how figures and titles are referenced within the manual.
Emphasizes understanding controls, proper use, and quick stopping for safety.
Details required personal protective equipment and work area checks before operation.
Covers safe operating practices, work area safety, and engine exhaust precautions.
Describes the machine's purpose, components, and authorized uses.
Specifies authorized tasks like cutting grass, brushwood, and small trees.
Warns against unsafe or unauthorized operations that could cause damage or injury.
Drives cutting means via drive tube and angle transmission.
Houses drive shaft transmitting rotary motion to angle transmission.
Transmits motion from the transmission tube to the cutting means.
The element designed to cut vegetation.
Lists the parts included in the packaging for assembly.
Guides the user on carefully opening the package and removing parts.
Details the steps for attaching the front and rear handle grips.
Instructions for attaching the Type I front hand grip assembly with screws.
Instructions for attaching the Type II front hand grip assembly with screws.
Steps for fitting the guard for specific cutting heads and blades.
Instructions for fitting the guard for Type II configurations.
Step-by-step guide to install the Type I cutting line head.
Instructions for removing the Type I cutting line head.
How to install various types of blades, including safety precautions.
Describes the switch for starting and stopping the engine.
Details how to adjust engine speed using the throttle and safety lever.
Allows the throttle control lever to be used.
Allows the engine to be started by hand.
Used to cold start the engine; features two positions.
Injects fuel into the carburettor to aid engine starting.
Shows machine operation and maintenance information.
Steps to take before starting machine use, including harness adjustment.
Proper adjustment of shoulder straps and securing the machine.
Procedures for performing essential safety checks before each use.
Lists items to check for proper machine condition and operation.
Describes tests to verify correct machine function before starting work.
Step-by-step instructions for starting the engine, including cold and hot start procedures.
Detailed guide for starting the engine when it is cold or hasn't been used recently.
Procedures for starting the engine immediately after it has been stopped.
Explains how to use the machine effectively and safely for various cutting tasks.
Covers different methods for cutting grass, brushwood, and trees.
Techniques for using the nylon line head, including scything and trimming.
Methods for using multi-point metal blades for cutting brushwood.
Safe usage of the saw blade for cutting wood and felling small trees.
Instructions on how to automatically advance the cutting line as it wears.
Tips for efficient use and preventing engine overheating.
Procedures for safely stopping the engine and the cutting means.
Steps to follow after finishing work, including cleaning and safety checks.
General safety precautions and importance of maintenance.
Instructions for mixing petrol and oil for the 2-stroke engine.
Specifies the type of unleaded petrol to use.
Specifies the type of high-quality synthetic oil for 2-stroke engines.
Guidelines for mixing and storing fuel blends safely.
Safe procedures for refuelling the machine.
How to clean the machine and engine to prevent overheating and fire risk.
Importance of keeping all fasteners tight for safe operation.
Procedure for lubricating the angle transmission with grease.
Procedure for lubricating the flexible shaft with grease.
Steps for cleaning or replacing the air filter for optimal engine performance.
Maintenance and replacement guidelines for the spark plug.
Procedures for maintaining cutting attachments, including sharpening and replacement.
Instructions on sharpening blades, noting safety recommendations.
When and how to replace worn or damaged blades.
Steps for replacing the cutting line head.
