To Next PageTo Next Page
Need help?Do you have a question about the Stiga B 26 JA and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Engine Displacement | 25.4 cc |
| Power Output | 0.7 kW |
| Cutting Width | 43 cm |
| Shaft Type | Straight |
| Handle Type | Loop |
| Fuel Tank Capacity | 0.65 l |
Guidance on understanding manual elements, warnings, and symbols.
Information on figures, components, and cross-references within the manual.
Operator familiarization, safe use, and potential hazards.
Steps before operation, including PPE and work area checks.
Safe practices while the machine is running.
Guidelines for responsible environmental care during use and disposal.
Overview of the tool and its intended functions.
Specifies intended users and limitations of the machine.
Explains the meaning of various safety symbols on the machine.
Details found on the machine's identification plate.
Identifies the primary parts of the machine.
Lists parts included in the packaging for assembly.
Instructions for safely opening the package and removing components.
Procedures for attaching the handles to the machine.
Steps to assemble the front handle with its guard.
Instructions for fitting the Type I handlebar.
Instructions for fitting the Type II handlebar.
Guidance on selecting and fitting appropriate cutting attachments and guards.
Steps to attach protective guards for cutting attachments.
Attaching guards for line heads and 3-point blades.
Attaching guards specifically for saw blades.
Procedures for installing and removing cutting attachments.
How to attach the cutting line head.
Steps to remove the cutting line head.
Attaching metal blades or saw blades.
Steps to remove metal blades or saw blades.
Connecting the drive-shaft tube to the engine unit.
Connecting the flexible drive-shaft tube.
Operation of the switch for starting and stopping the engine.
How to adjust the engine speed using the throttle lever.
Function of the safety lever in relation to the throttle.
Use of the optional button for starting a cold engine.
How to use the manual start handle.
Operation of the choke lever for cold starts.
Function of the primer button for fuel injection.
Steps to take before operating the machine.
How to adjust and wear the machine's harnesses correctly.
Essential safety checks to perform before and during use.
Routine inspection of machine parts for proper condition and fit.
Functional checks after starting the engine.
Procedures for starting the engine from cold or warm states.
Step-by-step guide for starting a cold engine.
Procedure for starting the engine when it's already warm.
How to operate the machine safely and effectively.
Methods for different cutting tasks.
Techniques for using the nylon line cutting head.
Techniques for using the 3-point metal blade.
Techniques and safety for using the saw blade.
How to extend the cutting line while working.
General tips for efficient and safe machine use.
How to safely stop the machine.
Steps to take after finishing work.
Important safety precautions before performing maintenance.
How to mix fuel and oil correctly.
Requirements for the gasoline used.
Requirements for the lubricating oil.
Steps for preparing and storing fuel mixture.
Safe procedure for adding fuel to the tank.
Instructions for cleaning the machine after use.
Importance of checking tightness of fasteners.
Lubrication procedure for the angle transmission.
Lubrication procedure for the flexible drive-shaft.
Steps for cleaning the air filter.
Maintenance and replacement of the spark plug.
General care for cutting attachments.
Recommendations for blade sharpening and balancing.
When and how to replace blades.
Steps for replacing the cutting line head.
How to sharpen the line cutting knife.
Adjusting the engine's idle speed.
Information on carburettor tuning and performance.
Safe procedures for moving and transporting the machine.
Information on seeking professional help for maintenance and repairs.
Details about the product's warranty terms and conditions.
Troubleshooting guide for common machine issues and their solutions.
