EN - 8
2.
3.
4.
5.
inserting the couplers into the respective
IMPORTANT When using the cutting line head,
the additional guard (Fig. 8.E, Fig. 9.E) must
always be tted, with line cutting knife (Fig. 33.A).
4.5.2
1.
2.
4.5.3 Fitting 3-point blade, saw
Apply the guard to the blade.
1.
2.
3.
4.
5.
6.
4.5.4
Apply the guard to the blade.
1.
2.
3.
4.6
1.
2. Once inserted, tighten the
To Next Page
Loading...
