EN - 9
4.7 MOUNTING THE FLEXIBLE
1.
2. Lift the pin and insert the
in the seat
, ensuring
3. Release the pin
the end of the tube .
4.
protruding
handgrip .
5.
in the protruding tube of the rear handgrip
6.
7.
8.
9.
10.
5. CONTROLS
5.1
Used to start and stop the engine. The
18
STOP - the engine stops and
cannot be restarted.
START - the engine can start and run.
5.2 THROTTLE CONTROL LEVER
Enables the speed of the cutting
5.3 THROTTLE SAFETY LEVER
enables
5.4 THROTTLE SHUTTER
Used to turn on the engine
5.5 HANDLE FOR MANUAL START
18
5.6 CHOKE LEVER
18.E
position B
5.7 PRIMER CONTROL BUTTON
18
6. USING THE MACHINE
IMPORTANT The safety regulations to
follow during machine use are described
in Chapter 2. Strictly comply with these
instructions to avoid serious risks or hazards.
IMPORTANT The machine
is supplied without fuel.
6.1 PREPARATION
1.
2.
To Next Page
Loading...
