EN - 12
of the engine could throw objects
and small stones 15 metres or more,
causing damage or injury to people.
a.
For heavier cutting it can be useful to tilt the
Do not work in this way if there
is the possibility of causing objects
to be thrown, which could harm
people, animals or cause damage.
b.
touch the ground and the cutting line is at the
c.
d. Cutting around trees
6.4.1.b 3-point blade
6.4.1.c Saw blade (if permitted)
When using the saw blade,
where permitted, the specic guard
must always be tted (cap. 4.3.3). The
blade must always be well sharpened
to reduce the risk of kickback.
When felling small trees, estimate the
direction in which the cut tree will fall, also
taking the wind direction into consideration.
Do not use the right-hand area of the
6.4.2
–
–
–
• hit the cutting line head against the
•
6.5 ADVICE ON OPERATION
–
–
–
–
NOTE Avoid using the machine at full
power for the rst 6- 8 working hours.
6.6 STOP
To Next Page
Loading...
