EN - 4
5.
6.
7. Article code.
8.
9.
10.
11. Electrical protection rating.
12.
IMPORTANT Quote the information on
the product identication label whenever you
contact an authorised service dealer.
IMPORTANT The example of the Declaration of
Conformity is provided on the last pages of the manual.
3.4 SAFETY SIGNS
Warning. Read the instructions
blade. Do not put hands or feet near
or under the opening of the blade.
The blade continues to turn even
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised service dealer.
4. ASSEMBLY
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or dangers.
Unpacking and completing the assembly should
be done on a at and stable surface, with enough
space for moving the machine and its packaging,
always making use of suitable equipment. Do not use
the machine until all the instructions provided in the
“ASSEMBLY” section have been carried out.
Before assembling, make sure the safety key is
not inserted in its housing.
4.1 UNPACKING
4.2 GRASS CATCHER ASSEMBLY (Fig.4 -
4.3 HANDLE ASSEMBLY (Fig.7 -15
5. CONTROLS
5.1
hine’s electric circuit.
IMPORTANT Remove the safety key whenever
the machine is unused or left unattended.
5.2 SWITCH COMMAND
engages/disengages the cutting blade
Start-up.
17.A.117.A.
Blade engagement. When the engine starts,
the cutting blade is also engaged.
Stop.
17.Ais released.
6. USING THE MACHINE
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or dangers.
6.1 PRELIMINARY PROCEDURES
Carry out this operation when
the cutting blade is stationary.
6.1.1
6.1.2
collection in the grass catcher (Fig.1