To Next PageTo Next Page
Need help?Do you have a question about the Stiga Park 340 X and is the answer not in the manual?
General| Engine Type | 4-stroke |
|---|---|
| Drive Method | Rear-Wheel Drive |
| Transmission Type | Hydrostatic |
| Wheels Rear | 2 |
| Cutting Height Range | 25-85 mm |
| Tire Size Rear | 16x7.50-8 |
Defines the designed purpose of the machine and acceptable operating modes.
Explanation of safety signs and specific decals, including parking brake and transmission indicators.
Emphasizes the need for operator familiarity with controls and safe operation procedures.
Essential checks and preparations before starting the machine, including attire and environment.
Guidelines for operating the machine safely during use, including slope handling and refueling.
Instructions for securing the machine during transport on vehicles.
Essential safety checks and considerations before initial use and operation.
Procedures for checking and topping up the engine oil level.
Instructions for checking and topping up the transmission fluid.
Performing essential safety checks before operation and actions if results fail.
Specific safety checks for electrical components and their functions.
Step-by-step guide for starting the engine and operating the machine safely.
Detailed steps for operating the machine, including starting, moving, and engaging PTO.
Guidance on setting the cutting height for optimal results and avoiding damage.
Guidelines for keeping the machine in optimal working order through a servicing programme.
Essential steps before performing maintenance, including safety precautions.
Detailed procedures for checking, topping up, and changing the engine oil.
Steps for checking the engine oil level and adding oil if necessary.
Procedures for changing and filling the engine oil, including frequency.
Guidance on replacing the engine oil filter and recommended service intervals.
Information on authorized service, recommended maintenance, and using genuine parts.
