Do you have a question about the Stiga Park 320 and is the answer not in the manual?
Brand | Stiga |
---|---|
Model | Park 320 |
Category | Lawn Mower |
Language | English |
Explains the structure and organization of the manual, including chapters and sections.
Defines and explains warning, instruction, prohibition, and information symbols used.
Provides guidance on storing the manual for accessible reference.
Details the specifications and features of the 2WD model.
Details the specifications and features of the 4WD model.
Specifies the intended use for grass cutting and with approved accessories.
Lists improper uses that can lead to hazards or damage.
Explains the meaning of safety symbols found on the device.
Identifies information found on the product's identification plate.
Lists and identifies the main parts of the lawnmower with figure references.
Emphasizes the importance of operator training and familiarization with the machine.
Outlines necessary precautions before operating the lawnmower.
Provides safety guidelines to follow during mower operation.
Covers safety aspects related to maintenance and storage.
Details safety precautions for transporting the lawnmower.
Discusses environmental considerations and proper disposal.
Lists the parts included in the packaging for assembly.
Instructions on how to open and close the engine cover.
Information about the battery type and initial charging.
Steps for connecting the battery to the mower's electrical system.
Instructions for adjusting the operator's seat.
Details on adjusting the steering wheel's height.
Instructions for mounting the towing hitch.
Information on quick-release fasteners for accessories.
Refers to the technical data table for tire pressure information.
Notes on accessory mounting instructions.
Operation of the lever for moving accessories between positions.
Explains the functions and operation of the parking brake pedal.
Describes the lever used to lock the parking brake.
Details the hydrostatic drive pedal for speed and direction control.
Operation of throttle and choke for engine speed and cold starts.
Controls air intake for cold starts on Vanguard engines.
Operation of the ignition switch and headlights.
Instructions for adjusting the steering wheel height.
Operation of the electric cutting height adjustment.
Lever for engaging the power take-off shaft.
Lever for engaging/disengaging the drive system.
Essential precautions to take before starting the engine and operation.
Refers to accessory combination tables for proper usage.
Instructions for safely filling the fuel tank with the correct gasoline.
How to check and maintain the engine oil level.
How to check and maintain the transmission oil level.
Pre-operation checks to ensure the mower is safe to use.
General safety checks covering fuel lines, cables, exhaust, and oil.
Specific safety checks for the mower's electrical system.
Procedures for starting the engine and beginning operation.
Instructions for operating the drive system for forward and reverse movement.
Steps to follow for safely stopping the engine and the mower.
Guidance on cleaning the lawnmower after use.
How to adjust and set the cutting height for optimal results.
Provides advice for effective and efficient grass cutting.
Overview of the maintenance schedule for reliability and safety.
General preparation steps before performing maintenance tasks.
Refer to chapter 13 for detailed maintenance schedule.
Refers to technical data for tire pressure adjustment.
Procedures for checking, refilling, and changing engine oil.
Steps for checking and topping up engine oil.
Details on when and how to change the engine oil.
Instructions for replacing the engine oil filter.
Procedure for replacing the fuel filter.
Checking and refilling transmission oil for 4WD models.
Steps for checking transmission oil level.
Procedure for changing transmission oil.
Checking the drive belts for proper condition and tension.
Maintenance and adjustment procedures for the steering system.
How to check for play in the steering linkage.
Steps for adjusting the steering linkage.
Information regarding battery maintenance and charging.
How to charge the battery using the mower's engine.
Instructions for charging the battery with an external charger.
Procedures for removing and installing the battery.
How to clean battery terminals.
Maintenance of the engine's air filter system.
Steps for cleaning or replacing the air filter element.
Procedure for replacing the spark plug.
How to clean the engine's air intake.
Lubrication points and procedures for the mower.
Location and function of fuses.