What to do if the starter motor rotates, but the engine will not start on Stiga Lawn Mower?
If the starter motor rotates but the engine won't start in your Stiga Lawn Mower, try replacing the fuel valve or replacing the ignition switch.
What to do if the starter motor does not rotate on my Stiga PARK 300 M Lawn Mower?
If the starter motor of your Stiga Lawn Mower doesn't rotate, possible solutions include checking the battery, changing the start relay, changing the ignition switch, changing the parking brake switch, or changing the seat switch (Black). You may also need to correct the problem.
Why does the battery keep discharging on my Stiga PARK 300 M?
If your Stiga Lawn Mower battery discharges repeatedly, consider the following solutions: replace the ignition switch, change the battery, replace the charge regulator, or repair the fault.
How to fix a Stiga PARK 300 M Lawn Mower engine that does not stop?
If the engine of your Stiga Lawn Mower does not stop, check the short circuit cable and its connection to the engine. Alternatively, replace the ignition switch.
What to do if I can't start the blades on my Stiga Lawn Mower?
If you can not start the blades on your Stiga Lawn Mower, consider changing the lifting switch or changing the seat switch.
How to fix electric height adjustment that does not work on Stiga PARK 300 M?
If the electric height adjustment on your Stiga Lawn Mower isn't working, try replacing the switch or switching the actuator.
Why does the engine not stop when I leave the seat on my Stiga PARK 300 M?
If the engine on your Stiga Lawn Mower doesn't stop when the operator leaves the seat, change the seat switch (Grey).
What causes the blades to not stop when the operator leaves the seat on a Stiga Lawn Mower?
If the blades on your Stiga Lawn Mower do not stop when the operator leaves the seat, consider changing the seat switch.
What to do if the blades don't stop when lifting the mower deck on a Stiga Lawn Mower?
If the blades of your Stiga Lawn Mower do not stop when lifting the mower deck, change the lifting switch.
Why can the engine be started without the parking brake activated on my Stiga PARK 300 M Lawn Mower?
If the engine of your Stiga Lawn Mower can be started without the parking brake activated, change the parking brake switch.
General| Power source | Petrol |
|---|---|
| Engine brand | Stiga |
| Engine model | ST 400 |
| Displacement | 414 cm³ |
| Engine Type | 4-stroke |
| Cutting Height Adjustment | Manual |
| Cutting height range | 25-85 mm |
General introduction, liability, and how to read the manual.
Details on warranty, exceptions, and ordering spare parts.
Machine identification, unpacking, and assembly procedures.
Routine maintenance schedule and technical specifications.
Procedures for removing and refitting various machine covers.
Steps for replacing the link arm and lubrication points.
Steps for servicing and adjusting the steering cable system.
Guide for replacing worn bushes on the steering shaft.
Safety precautions and explanation of the hydrostatic transmission (HST).
HST oil specifications, change procedure, and transmission removal.
Overview of belts, importance of genuine parts, and specifications.
Steps for disassembling and assembling drive belts (D).
Procedures for replacing clutch and equipment belts (C, B).
Description of cable construction, maintenance, and installation.
Procedures for servicing HST, brake, and accelerator cables.
Guidelines for diagnosing electrical faults using a step-by-step approach.
Procedures for replacing relays, fuses, switches, and the battery.
Wiring diagram and description of control panel switches.
Steps for replacing mower blades and related safety precautions.
Procedures for replacing mower deck belts and hubs.
Blade synchronisation and lift lever spring replacement procedures.
To Next Page
