To Next PageTo Next Page
Need help?Do you have a question about the Stiga Park 340 PWX and is the answer not in the manual?
General| Cutting Height Adjustment | Electric |
|---|---|
| Transmission | Hydrostatic |
| Transmission Type | Hydrostatic |
| Drive | Rear-wheel drive |
| Cutting Height Range | 25 mm - 90 mm |
| Fuel Tank Capacity | 12 L |
| Steering | Articulated |
| Engine Type | 4-stroke |
| Cutting Height | 25-75 mm |
List of optional accessories available for the machine.
Guide to correctly combining machine accessories.
Emphasizes the importance of operator training and familiarization.
Actions to take before operating the machine.
Critical safety guidelines to follow while operating the machine.
Instructions for performing maintenance and storing the machine.
Information regarding the battery, its handling, and safety.
Explanation of the parking brake pedal's function and positions.
How to use the drive pedal to control speed and direction.
Operation of the throttle and choke for engine speed control.
How to adjust air intake for engine starting and operation.
How to set the desired cutting height using the control.
Important safety measures to follow during machine operation.
Procedure for checking and topping up the engine oil.
Essential safety inspections before operating the machine.
A detailed checklist of general safety inspections.
Step-by-step guide to starting the engine and commencing work.
A summary of key maintenance tasks and their frequency.
Procedure for checking, topping up, and changing engine oil.
Detailed steps for checking and adding engine oil.
Step-by-step guide for changing the engine oil.
Instructions for cleaning or replacing the engine air filter.
Detailed steps for air filter cleaning and replacement.
