EN - 14
1. Press the pedal (par. 5.4) until
2. Shift the gear lever to "R"
reverse (par. 5.5).
3.
1. Press the pedal (par. 5.6) until
2.
6.5.4 Grass cutting
1.
2.
3.
4.
cutting height (par. 5.10) considering
5.
IMPORTANT To proceed in reverse gear
with the cutting means engaged, it is necessary
to press and hold the consent button (par.
5.9) so as not to cause the engine to stop.
When driving on grass free surfaces
6.5.5 Suggestions for maintaining
a nice lawn
1.
2.
3.
4.
to ensure a sharp cut of the grass and
cuttings through the collector channel.
5.
6.
should be cut a little higher to prevent
7.
than a third of the total height. If the grass is
8.
9.
10.
the horizontal position of the cutting-
6.5.6 Emptying the grass catcher (for
rear collection models only)
NOTE The emptying of the grass catcher
can only be done with the cutting means
disengaged, otherwise the engine stops.
•
•
1.
2.
"tortoise" speed position (par.
3.
To Next Page
Loading...
Need help?
General
