Stiga MP 84/98 User Manual

WORKSHOP MANUAL
MP 84/98 - MP 84/98 Hy - Edition 2018--->....
IMPORTANT NOTICE
The information contained herein is intended for
Service Operations and professionals only, able
to competently perform the operations described
herein, using the appropriate equipment in order
to safeguard se-curity and performance of the ma-
chine.
The manufacturer is not liable for damages or
injuries arising from operations performed by
individuals or inadequate facilities.
• The Manufacture reserves the right to make any im-
provements to the product of a technical or commercial
nature that may be necessary.There maybe, therefore,
dierences between the various series of machines
and that described here, though the basic features and
various repair methods will remain the same.
• © by STIGA - No use of the illustrations or duplica-
tion, reproduction or translation, even partial, of the
texts in this document may be made without explicit
authorization.
• All brands, names, logos and trademarks mentioned
belongto their respective owners.

Stiga MP 84/98 Specifications

General

Brand	Stiga
Model	MP 84/98
Category	Lawn Mower
Language	English

Summary

Understanding the Manual

How to Use the Manual

Explains manual navigation, sections, and functional unit maps.

Terminology and Abbreviations

Glossary of terms and abbreviations used in the manual.

Rules and Procedures for Service Centres

Identification and Procedures

Procedures for identifying machines, engines, and transmissions.

General Regulations and Safety

Safety Regulations

Guidelines for operator qualification, safety measures, and precautions during servicing.

Maintenance Criteria

Occasional and Routine Maintenance

Criteria for tuning and routine maintenance tasks.

Adjustments and Tuning

Blade Engagement and Brake Adjustment

Adjusting blade engagement and checking the blade brake.

Brake, Belt, and Pedal Adjustments

Adjusting brake, drive belt tension, and drive pedal.

Steering Adjustments

Adjusting steering play and steering geometry.

Blade Sharpening and Balancing

Procedure for sharpening and balancing cutting blades.

Removal of Parts and Assemblies

Engine and Hood Removal

Procedures for removing the front hood and engine.

Body Component and Side Guard Removal

Removing side guards, wheel cover, and dashboard.

Transmission and Axle Removal

Steps for removing the rear axle (transaxle) for mechanical and hydrostatic models.

Cutting Deck and Conveyor Removal

Procedures for removing the cutting deck and discharge conveyor.

Repairs

Wheel, Brake, and Bearing Repairs

Replacing tyres, wheels, bearings, and brake pads/disc.

Belt System and Blade Support Repairs

Replacing drive belts, blade supports/shafts, and lifting cable.

Engine and Accelerator Repairs

Replacing accelerator and adjusting carburettor.

Electrical System Information

Electrical Troubleshooting Guide

Troubleshooting common electrical problems, causes, and remedies.

Safety Device Checks

Checking safety devices, microswitches, terminal board, clutch, relay, and electronic card.

Battery and Charging System Checks

Checking recharge circuit and maintaining the sealed battery.

Fitting Safety Microswitches

Correct procedure for fitting safety microswitches.

Electrical Diagrams

Wiring diagrams for Stiga and Honda engines.

Technical Data Summary

Tightening Torques and Adjustments Summary

Summary of tightening torques for bolts and adjustment procedures.