Stiga Multiclip User Manual

72
ITALIANO
IT
affilata con una ruota smerigliatrice. Un’affilatura
errata (= temperatura troppo elevata) può far sì che
la lama diventi fragile.
L’affilatura della lama deve essere eseguita a umi-
do, utilizzando una pietra a umido o una mola.
Terminata l’affilatura della lama, è nec-
essario procedere al bilanciamento per
evitare i danni causati dalle vibrazioni.
SOSTITUZIONE DELLA LAMA
Utilizzare esclusivamente ricambi originali in caso
di sostituzione della lama, del portalama e della
vite.
Utilizzare esclusivamente ricambi orig-
inali. I ricambi non originali, anche
quelli installabili sulla macchina, pos-
sono provocare lesioni.
Quando si sostituisce la lama è necessario sosti-
tuire anche il bullone centrale, dotato di un fermo.
Coppia di serraggio della vite della lama: 65 Nm.
RICAMBI
I ricambi e gli accessori originali STIGA sono stati
sviluppati appositamente per le macchine STIGA.
Si ricorda che i ricambi e gli accessori non origina-
li non sono stati verificati e approvati dalla STIGA.
L’utilizzo di questi ricambi e accessori
potrebbe avere effetti negativi sul funzi-
onamento e sulla sicurezza della
macchina. La STIGA declina qualsiasi
responsabilità in caso di danni o lesioni
causati da detti prodotti.
La STIGA si riserva il diritto di eseguire modifiche sul pro-
dotto senza previa notifica.

Stiga Multiclip Specifications

General

Brand	Stiga
Model	Multiclip
Category	Lawn Mower
Language	English

Summary

General Information and Symbols

Symbols Explained

Explanation of various warning and informational symbols used on the machine.

Installation Procedures

Accessories Bag Contents

Lists the items included in the accessories bag.

Steering Wheel Installation

Instructions for correctly installing the steering wheel.

Battery Handling and Charging

Guidance on battery charging, maintenance, and storage.

Machine Controls

Height Setting Lever

Lever for adjusting the cutting deck height above the ground.

Blade Engaging Lever

Lever to engage or disengage the cutting deck blade.

Service Brake/Clutch

Pedal that combines service brake and clutch functions.

Parking Brake

Mechanism to lock the brake pedal in a depressed position.

Throttle/Choke Control

Control for setting engine speed and choking the engine.

Gear Lever

Lever for selecting forward gears, neutral, or reverse.

Starter Key

Ignition key used for starting and stopping the engine.

Using the Mower

Areas of Use

Lists approved tasks and STIGA accessories for machine use.

Before Starting Procedures

Safety System Overview

Engine and Maintenance

Starting and Stopping the Engine

Step-by-step instructions for starting and stopping the engine.

Engine Oil Level Check

Procedure for checking the engine's oil level before use.

Cutting and Operation Tips

Cutting Tips

Advice on preparing for and executing mowing operations.

Operation on Slopes

Precautions and guidelines for operating the machine on slopes.

Maintenance and Cleaning

General Maintenance Precautions

Conditions required before performing servicing on the machine.

Cleaning the Cutting Deck

Instructions for cleaning the underside of the cutting deck.

Engine Oil Change

Procedure and frequency for changing the engine oil.

Engine and Component Care

Lubrication Points

Locations and frequency for lubricating moving parts.

Air Filter Maintenance

Steps for cleaning and replacing the air filter.

Spark Plug Service

Instructions for checking, cleaning, and replacing the spark plug.

Carburettor Adjustment

Information on carburettor settings and when to seek service.

Clutch/Brake Adjustment

Procedure for adjusting the clutch and brake linkage.

Component Replacement and Adjustment

Removing the Cutting Deck

Step-by-step guide to detach the cutting deck from the machine.

Replacing V-Belt (Engine-Deck)

Instructions for replacing the V-belt between the engine and deck.

Replacing V-Belt (Engine-Transmission)

Instructions for replacing the V-belt between engine and transmission.

Adjusting Blade Brake

Procedure for adjusting the blade brake mechanism.

Blade Sharpening and Balancing

Guidance on sharpening and balancing the cutting blade.

Replacing the Blade

Instructions for replacing the cutting blade and related parts.

Spare Parts Information